If you don't have a compatible RAM stick, go to a computer store and ask for a BIOS flash. If that does not work, you can flash your motherboard with RAM stick compatible. To save the modification that was performed automatically, enters into the BIOS by pressing F1 and exit with saving changes (as indicated at the bottom of the screen). " Appears.Īpparently, when you press the button MemOK, motherboard trying to adapt the BIOS settings to make your RAM sticks compatible. Upon reboot, the message "Memory OK! Succeeds in system booting!. The system has power and all the case fans and graphics card fans spin up when the system is powered on, but the Memory LED, the CPU LED and the boot device LED all flash red and then the fans turn off. Then, the red LED flashes and the computer will reboot itself. Afterward, I discovered that several pins on the CPU had been bent, and, after much stressing and searching, I bent them back using tweezers and a toothpick. When the "DRAM LED" LED lights in red on the motherboard, locate the button "MemOK" next to this red LED on the motherboard and press it for 3 seconds. My CPU (AMD Phenom II x4) was running hotter than usual yesterday, so I went to clean off the old thermal paste and apply a new layer. Ask a computer store to avoid making your motherboard permanently inoperable. However, the BIOS flash is a risky operation. This update can sometimes solve this compatibility problem. flash the BIOS of your motherboard using compatible RAM sticks.use the "ASUS MemOK!" button present on your Asus motherboard.To fix this problem permanently, you have 2 options (to be tested in this sense) : Sometimes the computer will be able to restart once properly but the problem will occur again in the next few reboots. In some cases, the message "Overclocking failed" may appear on the screen.Ī compatibility problem with RAM sticks used.Ī temporary solution (but that doesn't work every time) is to restart the computer when the message "Overclocking failed" is displayed. This red CPU LED will come on INSTANTLY, before even checking other hardware, even without any ram or GPU plugged in.The computer doesn't boot and the "DRAM_LED" LED on the motherboard will light up in red. It’s about a 50/50 if it will post after resetting it. ASUS ranks among BusinessWeek’s InfoTech 100 for 12. It’s very odd to me that I can get it to start and post, but only after CMOS has been reset. Ask a computer store to avoid making your motherboard permanently inoperable. ASUS is a leading company driven by innovation and commitment to quality for products that include notebooks, netbooks, motherboards, graphics cards, displays, desktop PCs, servers, wireless solutions, mobile phones and networking devices. I have also gotten it to boot from a usb and start installing Windows 10 onto my ssd. I have gotten this thing to post multiple times, but normally shortly after (In bios) it will freeze. Run with nothing plugged in except power supply to Mobo, one ram card (alternating cards and slots), and Cpu fanĪll Mobo spacer screwed are tight and accurateĪir dusted all components and used alcohol wipes on terminalsĪll case LEDs and fans working perfectly.Īll used hardware was acquired through friends who had them working before I received them. If I attempt to start it without resetting CMOS, I will 100% get the solid red CPU LED light immediately.ĭismounting and remounting the cpu cooler/cpuĬhecked/remounted all power connections (8 and 16pin) If I reset the CMOS it will sometimes try to boot, generally flashing all other hardware Leds for a second and finishing as a solid red on Boot Device led, then continuing to post. The issue I’m facing is a solid red CPU LED with no post. Ill list my components and below that what I’ve tried and my results.Īn older model BitFenix Collosus Case (New) Asus M5A99FX PRO R2.0 (AM3+ - DDR3 2133) TDP 140W - Chipset AMD 990FX - USB 3.0. I have the same issue I’ve seen on tons of threads and have tried just about everything to get this pc running.
0 Comments
Leave a Reply. |